The Operator can view the list of all loops/clusters – or – see the list of favorite loops.

1. Tap MANAGE DOORS - from main “pie” menu.

2. Tap the desired Cluster Name in the list of loops to open its list of doors.
   • All button - shows all Clusters
   • Favorites button - shows Clusters that are marked as Favorites.

Operator can issue lock, pulse and unlock commands from this screen to Doors in the Loop.

• LOCK: issues a lock command to the selected doors.
• UNLOCK: issues a unlock command to selected doors.
• PULSE: issue a pulse which is momentary unlock command to the selected doors.

TIP: a scrollbar appears on right side of screen, if the list of doors is longer than the screen.     

3. Tap the checkboxes to select each Door(s) that you want to control.
   • Notice: Tapping the checkbox again will toggle or uncheck and deselect the door.
   • Notice: you can also see the state of each door lock (green lock vs. red unlocked).
   • Also: Tapping the [ Select All ] option in the top right corner will select/check all doors.
   • Tapping the [ < ] back arrow on the top left corner will exit the screen. You can exit the screen without sending any commands.
   • The command is only issued to the selected (checked) doors.
4. When you have selected the desired door(s), you can Tap the desired command button (UNLOCK, PULSE, LOCK) on the bottom of screen, to control selected door(s).

A lock or unlock command will remain in effect until acted upon, either by issuing another operator command or by schedule.

5. Tap the [ < ] back arrow to return to the Loop list.

6. TAP-N-PULL the screen to refresh the Door List. The Red/Green lock state will update.